Weiler 08064 4" x 1/2" Twist Wire Wheel .020 Wire 3/8"-1/2" Arbor Hole
Roll over image to zoom in Click on image to zoom
Weiler 08064 4" x 1/2" Twist Wire Wheel .020 Wire 3/8"-1/2" Arbor Hole

Weiler 08064 4" Twist Knot Wire Wheel, .020" Steel, 1/2"-3/8" Arbor

WeilerSKU: BRS08064
No reviews
Price:
$36.73

Description

The Weiler 08064 is a 4 in standard twist knot wire wheel with a 1/2-3/8 in arbor hole. Twisted .020 in steel knots give heavy-duty brushing action with some flex for demanding work on somewhat irregular surfaces.

Use it to remove rust, scale and heavy corrosion, strip coatings, knock down heavy burrs, rough up a surface for prep or trim excess molded rubber and plastic. Weiler lists it for bench and pedestal grinders, buffing lathes, straight grinders, die grinders and right angle die grinders.

The 1/2 in face carries 24 knots with a 7/8 in trim. Max speed is 20,000 RPM, and plenty of die grinders spin faster, so check your tool's rating before you mount it.

This listing includes 1 wire wheel.

Tool Specifications

Type
Wheel brush
Max RPM
20,000 RPM
Wire
0.02 in
Material
Carbon steel
Size & drive
Width1/2 in
Diameter4 in
Wire diameter0.02 in
Trim length7/8 in
Arbor1/2 in hole, 3/8 in with adapter
Max RPM20,000 RPM
Fit & use
Brush typeWheel brush
Works withDie grinder, Right angle die grinder, Straight grinder, Bench/pedestal grinder, Buffing lathe
Build & pack
MaterialCarbon steel
Wire styleStandard twist knot
Pack quantity1
General
BrandWeiler
MPN08064
SKUBRS08064
Shipping weight0.41 lb

Specifications are the manufacturer's published values.

The Weiler 08064 is a 4 in standard twist knot wire wheel with a 1/2-3/8 in arbor hole. Twisted .020 in steel knots give heavy-duty brushing action with some flex for demanding work on somewhat irregular surfaces.

Use it to remove rust, scale and heavy corrosion, strip coatings, knock down heavy burrs, rough up a surface for prep or trim excess molded rubber and plastic. Weiler lists it for bench and pedestal grinders, buffing lathes, straight grinders, die grinders and right angle die grinders.

The 1/2 in face carries 24 knots with a 7/8 in trim. Max speed is 20,000 RPM, and plenty of die grinders spin faster, so check your tool's rating before you mount it.

This listing includes 1 wire wheel.

Features

  • Removes rust, scale and heavy corrosion, strips coatings, knocks down heavy burrs and trims excess molded rubber or plastic.
  • 4 in diameter with .020 in steel wire, 1/2 in face, 7/8 in trim and a 20,000 RPM max, so use only a tool rated at or below 20,000 RPM.
  • 1/2-3/8 in arbor hole for bench and pedestal grinders, buffing lathes, straight grinders, die grinders and right angle die grinders.
  • Standard twist knot construction with 24 knots and 7/16 in thickness at the face plates for heavy-duty brushing with some flex.
  • Sold as 1 wire wheel; always wear eye and face protection when brushing.

Recently Viewed