Description
The ArcticPRO LD-2 gives you two ways to hunt down an A/C leak in one handheld tool. Sniff out the leak with the heated electronic sensor, then switch on the built-in UV light to see exactly where the dye is coming out.
The sensor is built for the hard-to-find HFC and HFO refrigerants, catching R-134a leaks under 0.05 oz per year and R-1234yf leaks under 0.015 oz per year. A 1 to 9 digital leak size readout works independently of the audio alarm and the 3 sensitivity levels, so you can zero in on the source instead of guessing. It warms up in under 20 seconds and calibrates itself to the surrounding air automatically.
Three UV LEDs in the 385 to 415 nm range make A/C dye glow bright with no UV enhancement glasses needed. The 17 inch flexible probe reaches tight spots around fittings, hoses and the compressor, and a flashing LED near the tip shows the alarm right where you are looking, with an audio mute mode for quiet work. It reads all HFC, HCFC, CFC and HFO refrigerants including SNAP blends, so it earns its keep on HVAC/R equipment as well as vehicles.
The LD-2 is certified to SAE J2791, SAE J2913 and EN 14624. Four AA alkaline batteries run it for 4 to 6 hours of continuous use, and a low battery indicator tells you when it is time to swap them. The long-life sensor is rated for more than 10 years, and the detector and sensor are backed by a 2 year warranty.
This listing includes the LD-2 detector, a sensor maintenance kit, 4 AA alkaline batteries and a carrying case.
Mahle ArcticPRO LD-2 Dual Mode Refrigerant Leak Detector with UV Light
$472.99
Documents
Equipment Specifications
| Machine weight | 1.5 lb |
|---|---|
| Warranty | 2 years, including the sensor |
| Compatible with | R-1234yf, R-134a, R-22, R-410A, R-410B, R-404A, R-12, R-407C, R-409A (FX-56), R-422D, R-406A (GHG), R-414A (GHG-X4), R-414B (Hot Shot), R-502, R-500, SNAP approved refrigerants |
|---|
| Brand | Mahle |
|---|---|
| MPN | 026 80635 00 |
| SKU | MSS0268063500 |
| Shipping weight | 1.5 lb |
Specifications for this option are not available yet.
Specifications are the manufacturer's published values.
The ArcticPRO LD-2 gives you two ways to hunt down an A/C leak in one handheld tool. Sniff out the leak with the heated electronic sensor, then switch on the built-in UV light to see exactly where the dye is coming out.
The sensor is built for the hard-to-find HFC and HFO refrigerants, catching R-134a leaks under 0.05 oz per year and R-1234yf leaks under 0.015 oz per year. A 1 to 9 digital leak size readout works independently of the audio alarm and the 3 sensitivity levels, so you can zero in on the source instead of guessing. It warms up in under 20 seconds and calibrates itself to the surrounding air automatically.
Three UV LEDs in the 385 to 415 nm range make A/C dye glow bright with no UV enhancement glasses needed. The 17 inch flexible probe reaches tight spots around fittings, hoses and the compressor, and a flashing LED near the tip shows the alarm right where you are looking, with an audio mute mode for quiet work. It reads all HFC, HCFC, CFC and HFO refrigerants including SNAP blends, so it earns its keep on HVAC/R equipment as well as vehicles.
The LD-2 is certified to SAE J2791, SAE J2913 and EN 14624. Four AA alkaline batteries run it for 4 to 6 hours of continuous use, and a low battery indicator tells you when it is time to swap them. The long-life sensor is rated for more than 10 years, and the detector and sensor are backed by a 2 year warranty.
This listing includes the LD-2 detector, a sensor maintenance kit, 4 AA alkaline batteries and a carrying case.