Haltec H-5265 Standard Bore Lock-On Air Chuck 1/4" NPT
Roll over image to zoom in Click on image to zoom
Haltec H-5265 Standard Bore Lock-On Air Chuck 1/4" NPT

Haltec H-5265 Standard Bore Lock-On Air Chuck 1/4" NPT

HaltecSKU: HALH-5265
No reviews
Price:
$17.01

WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Description

The H-5265 Standard bore air chuck that locks onto a Standard Bore valve stem when the sleeve is pushed to the forward position. To release pull back the sleeve.


Manufacturer Part Number: H-5265

Features

  • Made of Brass/Steel
  • Features an easy lock system.
  • Use range of 0 to 300 psi
The H-5265 is a specially designed air chuck that locks onto the cap threads of a Standard Bore valve stemDesigned to be used on commercial, aviation, & off-the-road vehicle tiresEasy to use: Push slide back toward the airline until placed on the valve - push slide forward to lock in place

Features

  • Lock on, so it grips the cap threads and holds tight even at full flow.
  • 1/4" NPT female thread mates up with standard shop airline fittings.
  • Built for standard bore valves, so double check the stem before you order.
  • Brass and steel construction survives being dropped, kicked, and run over, which it will be.
  • Sold as a single piece, so order what you actually need.

The H-5265 Standard bore air chuck that locks onto a Standard Bore valve stem when the sleeve is pushed to the forward position. To release pull back the sleeve.


Manufacturer Part Number: H-5265

Features

  • Made of Brass/Steel
  • Features an easy lock system.
  • Use range of 0 to 300 psi
The H-5265 is a specially designed air chuck that locks onto the cap threads of a Standard Bore valve stemDesigned to be used on commercial, aviation, & off-the-road vehicle tiresEasy to use: Push slide back toward the airline until placed on the valve - push slide forward to lock in place

Features

  • Lock on, so it grips the cap threads and holds tight even at full flow.
  • 1/4" NPT female thread mates up with standard shop airline fittings.
  • Built for standard bore valves, so double check the stem before you order.
  • Brass and steel construction survives being dropped, kicked, and run over, which it will be.
  • Sold as a single piece, so order what you actually need.

Recently Viewed