Chicago Pneumatic CP7783-6 1" Dr. 6" Square Shank 1770 Ft/Lbs Impact Wrench
Roll over image to zoom in Click on image to zoom
Chicago Pneumatic CP7783-6 1" Dr. 6" Square Shank 1770 Ft/Lbs Impact Wrench

Chicago Pneumatic CP7783-6 1" Air Impact Wrench, 6" Anvil, 1770 ft-lb

Chicago PneumaticSKU: CPT7783-6
No reviews
Price:
$804.57

WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Description

The Chicago Pneumatic CP7783-6 is a lightweight 1 inch drive air impact wrench designed to make truck tire changing easier on the tech. It delivers up to 1,770 ft-lb in reverse at 6,200 RPM, and at 20.9 lb it is light for a 1 inch tool.

This is the 6 inch extended anvil model with dual socket retention, hole and friction ring, for reaching nuts on deep truck wheels. The forward working range runs from 413 to 1,250 ft-lb.

A pinless closed reinforced rocking dog mechanism hits at 900 blows per minute inside an aluminum housing. The D-handle sets in four positions, the side handle helps you steady it, and the exhaust switches easily between top and bottom.

It measures 19.69 inches long and needs a 1/2 inch air inlet with at least a 3/4 inch hose at 90 psi. It averages 10.1 CFM and draws 40 CFM under load.

This listing includes one CP7783-6 impact wrench.

The Chicago Pneumatic CP7783-6 is a lightweight 1 inch drive air impact wrench designed to make truck tire changing easier on the tech. It delivers up to 1,770 ft-lb in reverse at 6,200 RPM, and at 20.9 lb it is light for a 1 inch tool.

This is the 6 inch extended anvil model with dual socket retention, hole and friction ring, for reaching nuts on deep truck wheels. The forward working range runs from 413 to 1,250 ft-lb.

A pinless closed reinforced rocking dog mechanism hits at 900 blows per minute inside an aluminum housing. The D-handle sets in four positions, the side handle helps you steady it, and the exhaust switches easily between top and bottom.

It measures 19.69 inches long and needs a 1/2 inch air inlet with at least a 3/4 inch hose at 90 psi. It averages 10.1 CFM and draws 40 CFM under load.

This listing includes one CP7783-6 impact wrench.

Features

  • Built to speed up truck and bus tire changing, breaking loose and running down large wheel nuts with less fatigue.
  • Delivers 1,770 ft-lb of max reverse torque and a 413 to 1,250 ft-lb forward working range at 6,200 RPM and 900 blows per minute.
  • 1 inch square drive on a 6 inch extended anvil with hole and friction ring retention, plus a 1/2 inch air inlet and 3/4 inch minimum hose.
  • Pinless closed reinforced rocking dog mechanism in an aluminum housing, four-position D-handle and switchable exhaust, 20.9 lb and 19.69 inches long.
  • Includes one CP7783-6 with side handle; run it at 90 psi on a 3/4 inch hose and oil it regularly at the inlet.

Recently Viewed