Uryu UG-1250LM 5" Low Speed OTR Tire Buffer, 7200 RPM, 1/2"-13

UryuSKU: ASCUG-1250LM
No reviews

Price:
Sale price$1,133.19

Description

The Uryu UG-1250LM is an industrial duty low speed buffer for OTR tire repair, built for buffing, skiving and cup cutter work. Its governed 1 hp air motor holds 7,200 RPM under load for fast, steady rubber removal.

The lever throttle controls a wide range of speeds, and the piped away exhaust with a box muffler quiets the tool and keeps dust from blowing across the repair. A sand cast aluminum housing stands up to heavy shop use.

This is the UG-1250LM, with a 1/2-13 spindle that takes wheels up to 5 in. It runs on 85 PSI through a 3/8 in NPT inlet and a 1/2 in hose, uses about 32.7 CFM and weighs 6.2 lb at 17.2 in long.

This listing includes one UG-1250LM buffer with its box muffler and piped away exhaust hose. Wheels, rasps and cup cutters are sold separately.

Power Tool Specifications

Free speed
7,200 RPM
Wheel
5 in
Air inlet
3/8 in
Weight
6.2 lb
Speed & drive
Free speed7,200 RPM
Wheel size5 in
Spindle thread1/2-13
Air & power
Air inlet3/8 in
Min hose size1/2 in
Air consumption (avg)32.7 CFM
Operating pressure85 PSI
Build & pack
Length17.2 in
Tool weight6.2 lb
MaterialSand cast aluminum
General
BrandUryu
MPNUG-1250LM
SKUASCUG-1250LM

Specifications are the manufacturer's published values.

The Uryu UG-1250LM is an industrial duty low speed buffer for OTR tire repair, built for buffing, skiving and cup cutter work. Its governed 1 hp air motor holds 7,200 RPM under load for fast, steady rubber removal.

The lever throttle controls a wide range of speeds, and the piped away exhaust with a box muffler quiets the tool and keeps dust from blowing across the repair. A sand cast aluminum housing stands up to heavy shop use.

This is the UG-1250LM, with a 1/2-13 spindle that takes wheels up to 5 in. It runs on 85 PSI through a 3/8 in NPT inlet and a 1/2 in hose, uses about 32.7 CFM and weighs 6.2 lb at 17.2 in long.

This listing includes one UG-1250LM buffer with its box muffler and piped away exhaust hose. Wheels, rasps and cup cutters are sold separately.

Features

  • Buffs, skives and cuts rubber with a cup cutter for OTR and large truck tire repairs.
  • Governed 1 hp motor holds 7,200 RPM under load, with a lever throttle for speed control.
  • 1/2-13 spindle takes wheels, rasps and cup cutters up to 5 in diameter.
  • Sand cast aluminum housing with a box muffler and piped away exhaust to cut noise and blowing dust.
  • Sold as one buffer; run at 85 PSI on a 1/2 in hose with a 3/8 in inlet, about 32.7 CFM.

Recently Viewed