Schrader 7381 3-1/16" Metal Truck Valve Extension Pack of 10
Schrader 7381 3-1/16" Metal Truck Valve Extension Pack of 10
Roll over image to zoom in Click on image to zoom
Schrader 7381 3-1/16" Metal Truck Valve Extension Pack of 10Schrader 7381 3-1/16" Metal Truck Valve Extension Pack of 10

Schrader 7381 3-1/16" Metal Truck Valve Extension Pack of 10

SchraderSKU: SCH7381[B]
No reviews
Price:
$64.35

WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Description

Checking an inner dual should take ten seconds, and if it takes longer than that it stops happening. The Schrader 7381-10PK valve extension brings the valve out to where a tech can get a chuck on it, running 3-1/16 inches. Metal construction rather than plastic, because vibration and impact crack the plastic ones inside a season. Pack of 10. Match the length to the wheel, since an over-long extension is something to snag on.

Features

  • Brings the valve mouth out to where a tech can actually reach it, so wheels, rims and brake hardware stop getting in the way of a pressure check.
  • Measures 3-1/16 inches, the length that clears the obstruction without leaving excess to snag on.
  • Threads onto regular cap threads (.305 inch, 32 TPI) at the valve mouth, so no adapter or special tooling is needed.
  • Nickel plated brass, which resists the road salt and brine that corrode a plated steel extension into a seized lump.
  • Valve cap included. Pack of 10, which is fleet quantity rather than a single replacement.

Valve Extension Specifications

Length
3.06 in
Material
Brass
Max pressure
150 PSI
Pack quantity
10
Fitment
Vehicle applicationTruck
Build & pack
Length3.06 in
Max pressure150 PSI
MaterialBrass
Pack quantity10
General
BrandSchrader
MPN7381-10PK
SKUSCH7381[B]
Shipping weight1.01 lb

Specifications are from the manufacturer's published data where available. Check your rim's valve hole size and your TPMS sensor before ordering.

Checking an inner dual should take ten seconds, and if it takes longer than that it stops happening. The Schrader 7381-10PK valve extension brings the valve out to where a tech can get a chuck on it, running 3-1/16 inches. Metal construction rather than plastic, because vibration and impact crack the plastic ones inside a season. Pack of 10. Match the length to the wheel, since an over-long extension is something to snag on.

Features

  • Brings the valve mouth out to where a tech can actually reach it, so wheels, rims and brake hardware stop getting in the way of a pressure check.
  • Measures 3-1/16 inches, the length that clears the obstruction without leaving excess to snag on.
  • Threads onto regular cap threads (.305 inch, 32 TPI) at the valve mouth, so no adapter or special tooling is needed.
  • Nickel plated brass, which resists the road salt and brine that corrode a plated steel extension into a seized lump.
  • Valve cap included. Pack of 10, which is fleet quantity rather than a single replacement.

Recently Viewed