Description
Checking pressure on an inner dual shouldn't cost you a knuckle. The Haltec HE-200 extension brings the valve out where a tech can actually get a chuck on it, running 1-3/8" long with a 90 degree bend to clear the wheel face. Get the length right and the assembly stays balanced and the stem stays intact, which is the whole point of spending money on a good one.
Features
- Puts the valve somewhere a tech can reach it, so pressure checks on inner duals and deep wheels stop being a wrestling match.
- Runs 1-3/8" long, with a 90 degree bend.
- Threads onto a standard bore valve, no adapters and no special tooling required.
- Built to shrug off the knocks a wheel well hands out season after season.
- Comes 25 to a pack, so you can load the bench and the service truck in one go.
MPN: HE-200-25PK
Haltec HE-200 1-3/8" Valve Extension with 90?? Bend 3/4" Height Pack of 25
$272.14
Documents
Valve Extension Specifications
- Length
- 1.375 in
- Bend
- 90°
- Material
- Brass
- Pack quantity
- 25
| Length | 1.375 in |
|---|---|
| Bend angle | 90° |
| Material | Brass |
| Pack quantity | 25 |
| Brand | Haltec |
|---|---|
| MPN | HE-200-25PK |
| SKU | HALHE-200[C] |
Specifications for this option are not available yet.
Specifications are from the manufacturer's published data where available. Check your rim's valve hole size and your TPMS sensor before ordering.
Checking pressure on an inner dual shouldn't cost you a knuckle. The Haltec HE-200 extension brings the valve out where a tech can actually get a chuck on it, running 1-3/8" long with a 90 degree bend to clear the wheel face. Get the length right and the assembly stays balanced and the stem stays intact, which is the whole point of spending money on a good one.