Coats 1600-3D Direct Drive Wheel Balancer, 220V 1-Phase, 40 mm Shaft
Pasa el cursor sobre la imagen para ampliarla. Clic en la imagen para aumentar
Coats 1600-3D Direct Drive Wheel Balancer, 220V 1-Phase, 40 mm Shaft

Coats 1600-3D Direct Drive Wheel Balancer, 220V 1-Phase, 40 mm Shaft

CoatsSKU: HEN1600-3D
0 reseña
Precio:
$10,842.11

Descripción

The Coats 1600-3D is a touchscreen direct drive wheel balancer for car and light truck wheels, with the motor and spindle built as one pre-balanced assembly. It takes 8-30 inch rims from 2-20 inches wide, tires up to 44 inches tall and assemblies up to 160 lb on a 40 mm shaft.

ProBalance Technology works to minimize both static and couple unbalance, and Speed Thread runs the hub nut on with a push of the pedal. 3D automatic data entry reads distance, diameter and width, while laser guided weight placement and Stop, Lock and Index put every weight right where it belongs.

This is the 220V single phase model, part number 80016003D, made for a 20 amp NEMA L6-20R circuit. Standard accessories include double sided collets, a premium hub nut, small pressure cup and rubber lip, calipers, a wheel weight hammer, weight tray studs, scraper and a side shadow board.

This listing includes 1 wheel balancer with its standard accessories.

Wheel Balancer Specifications

Rim diameter
8 to 30 in
Shaft
40 mm
Max tire
44 in
Max weight
160 lb
Wheel range
Min rim diameter8 in
Max rim diameter30 in
Min wheel width2 in
Max wheel width20 in
Max tire diameter44 in
Max tire and wheel weight160 lb
Shaft diameter40 mm
Power & build
Power supply220V 1-phase
Electrical220-230V, 60 Hz, 20 A, 1-phase, NEMA L6-20R outlet
Machine dimensions (in)57 W x 55 D x 75 H
Warranty3 years on inverter, piezos and circuit boards, 1 year on touch panel, display and all other parts, 6 months labor, 10 years on the direct drive motor (pro-rated after 5 years)
Kit & cross reference
Included accessoriesWeight tray studs, 3 (85608850)
Double sided collets, 2.04-5.20 in (85609499)
Calipers (8309011)
Premium wheel weight hammer (85607780)
Premium hub nut (85610908)
Small pressure cup and rubber lip (8112106)
No mar ring (85608312)
Spring (8112107)
Scraper (8113390)
Side shadow board (85612685)
General
BrandCoats
MPN80016003D
SKUHEN1600-3D

Specifications are the manufacturer's published values.

The Coats 1600-3D is a touchscreen direct drive wheel balancer for car and light truck wheels, with the motor and spindle built as one pre-balanced assembly. It takes 8-30 inch rims from 2-20 inches wide, tires up to 44 inches tall and assemblies up to 160 lb on a 40 mm shaft.

ProBalance Technology works to minimize both static and couple unbalance, and Speed Thread runs the hub nut on with a push of the pedal. 3D automatic data entry reads distance, diameter and width, while laser guided weight placement and Stop, Lock and Index put every weight right where it belongs.

This is the 220V single phase model, part number 80016003D, made for a 20 amp NEMA L6-20R circuit. Standard accessories include double sided collets, a premium hub nut, small pressure cup and rubber lip, calipers, a wheel weight hammer, weight tray studs, scraper and a side shadow board.

This listing includes 1 wheel balancer with its standard accessories.

Features

  • Speeds up every balance with Speed Thread pedal hub nut mounting, 3D auto data entry and ProBalance Technology that targets static and couple unbalance together.
  • Balances 8-30 in rims from 2-20 in wide, tires up to 44 in and assemblies up to 160 lb, with 8 balancing modes on 220V single phase power.
  • Made for car and light truck wheels on a 40 mm shaft; works with Coats 40 mm collets, cones and pin plates plus the 525 and 525 Auto-Down wheel lifts.
  • Direct drive motor and spindle in one pre-balanced assembly, touchscreen interface, laser weight placement and Stop, Lock and Index; accessory kit included.
  • Sold as 1 balancer with a 57 x 55 in footprint and 75 in height; plan on a 220V 20A NEMA L6-20R outlet and about 650 lb of freight.

Visto recientemente