Descripción
The Coats 80C is a center clamp tire changer for alloy and steel wheels on cars and light trucks, built for high-volume shops. It locks the wheel on a center pedestal with a manual center lock for quick, easy operation that helps minimize wheel damage, and it handles 12-30 inch rims, tires up to 50 inches in diameter and rims up to 15 inches wide.
A Robo-Arm with an 18 inch automated vertical stroke presses the bead down, and the RoboRoller powered assist keeps the bead from rolling back over the mount tool on difficult tires. The mount/demount head swings away for easy access, and the hand controlled bead loosener works up to 14 inches wide. A standard auxiliary bead sealer concentrates airflow to seal beads, backed by a 5.4 gallon tank in the tower.
This is the 220V electric model, part 80080CEH220, with a 2 HP motor running on 220V, 60 Hz at 14 amps, single phase. It also needs a 5 CFM shop air supply at 150 PSI, with 110-175 PSI at the machine.
It comes with the auxiliary bead sealer, two protection cones for the center lock, an anti-rotation extension pin for reverse mount wheels, a light truck cone kit for 5.86 inch center bores and two rubber protection pads. A grey high-spoke Duckhead with two inserts, a paste lube bracket and brush, bead loosener shoe socks, lift tool socks and a premium storage cabinet round out the package.
This listing includes 1 tire changer.
- Rim range12 to 30 in
- Max tire diameter50 in
- Max wheel width15 in
- Power220V 1-phase
Coats 80C Center Clamp Tire Changer, 220V Electric, Robo-Arm, 80080CEH220
$12,870.14
Documents
Equipment Specifications
- Rim diameter
- 12 to 30 in
- Max tire diameter
- 50 in
- Max wheel width
- 15 in
- Power supply
- 220V 1-phase
| Vehicle application | Car, Light truck |
|---|
| Min rim diameter | 12 in |
|---|---|
| Max rim diameter | 30 in |
| Clamping range | Center clamp with manual lock, 12 to 30 in rims |
| Max tire diameter | 50 in |
| Max wheel width | 15 in |
| Specialty tires | Run-flat, Low profile, Reverse mount wheels |
| Power supply | 220V 1-phase |
|---|---|
| Electrical | 220V, 60 Hz, 14 A |
| Operating air pressure | 110-175 PSI |
| Air supply | 5 CFM |
| Bead loosening width | 14 in |
|---|
| Assist arm | Included |
|---|---|
| Inflation system | Standard auxiliary bead sealer, 5.4 gallon tower tank, 0-60 PSI inflation gauge, pressure limiter set at 60 PSI |
| Mount/demount head | Swing-away arm with grey high-spoke Duckhead and 2 Duckhead tool inserts (8182961) |
| Machine dimensions (in) | 74 W x 65 D x 88 H |
|---|---|
| Warranty | 3 years parts, 6 months labor; 1 year on air cylinder components, valves, seal kits, rotary coupling, hoses and air lines; 5 years transmission, pro-rated after 3 years |
| Kit contents | Auxiliary bead sealer (85606545) Bead loosener shoe socks, 2 (8183606) Paste lube bracket and brush (85009048) Protection cone for center lock, 2 (83019057) Grey high-spoke Duckhead mount/demount tool (8184432) Duckhead mount/demount tool inserts, 2 (8182961) Lift tool socks, 10 (85000783) Anti-rotation extension pin, long (83031335) Light truck cone kit, 5.86 in center bore (85612920) Rubber protection pad, 2 (89231517) Premium storage cabinet (85610105) |
|---|
| Brand | Coats |
|---|---|
| MPN | 80080CEH220 |
| SKU | HEN80XCE220 |
Specifications for this option are not available yet.
Specifications are the manufacturer's published values.
The Coats 80C is a center clamp tire changer for alloy and steel wheels on cars and light trucks, built for high-volume shops. It locks the wheel on a center pedestal with a manual center lock for quick, easy operation that helps minimize wheel damage, and it handles 12-30 inch rims, tires up to 50 inches in diameter and rims up to 15 inches wide.
A Robo-Arm with an 18 inch automated vertical stroke presses the bead down, and the RoboRoller powered assist keeps the bead from rolling back over the mount tool on difficult tires. The mount/demount head swings away for easy access, and the hand controlled bead loosener works up to 14 inches wide. A standard auxiliary bead sealer concentrates airflow to seal beads, backed by a 5.4 gallon tank in the tower.
This is the 220V electric model, part 80080CEH220, with a 2 HP motor running on 220V, 60 Hz at 14 amps, single phase. It also needs a 5 CFM shop air supply at 150 PSI, with 110-175 PSI at the machine.
It comes with the auxiliary bead sealer, two protection cones for the center lock, an anti-rotation extension pin for reverse mount wheels, a light truck cone kit for 5.86 inch center bores and two rubber protection pads. A grey high-spoke Duckhead with two inserts, a paste lube bracket and brush, bead loosener shoe socks, lift tool socks and a premium storage cabinet round out the package.
This listing includes 1 tire changer.